ここから本文です
TWO:It is a simple affair, this putting up one's hands, but even at such a moment a free citizen has a strong objection against being compelled to this by others, who are no more than one's self, who ask it without any right, except the might derived from the weapon in their hands.

Hydrocyclone (liquid cyclone)01

Hydrocyclone (liquid cyclone)02

A hydrocyclone (liquid cyclone) injects treatment solution into stationary equipment to perform separation, classification, and concentration, and is an innovative separator with a very simple structure and no drive unit.

Structure of a hydrocyclone (liquid cyclone)

A suspension containing fine particles of several micrometers or more is supplied to a cylindrical container circumferentially at high speed. And as a result it starts to rotate and a centrifugal force is generated. At this time a gravitational acceleration of several tens of thousands of G is generated in the circumferential direction, and thus leading to fast sedimentation and concentration of the fine particles. The separated concentration can be freely selected by changing the supply rate (supply pressure and flow rate) and the flow ratio of the outlet. Our hydrocyclone (liquid cyclone) was designed and manufactured to classify and concentrate fine particles, and so has a small element.

THREE:723. A knowledge of specific conditions, such as strains, the range and rate of movements, and so on.
  • Equipment costs can be reduced.
  • Operating costs can be reduced.
  • Maintenance costs can be reduced.
  • Any change in raw material and product can be easily addressed.
  • Large amounts can be treated in a small area.
  • Separation and cleaning are easy because of the simple structure.
  • Simplified control
  • This equipment can be operated in synchronization with external devices.
  • Alarm and interlock mechanism.
THREE:More deliberately, settling down, first the hanging bulk of the unknown man, then the spreading folds of the parachute drifted into mistand mystery.A proof of this last proposition is found in the fact that a thorough latheman will perform nearly as much work and do it as well on an old English lathe with plain screw feed, as can be performed on the more complicated lathes of modern construction; but as economy of skill is sometimes an equal or greater object than a saving of manual labour, estimates of tool capacity should be made accordingly. The main points of a lathe, such as may most readily affect its performance, are firsttruth in the bearings of the running spindle which communicates a duplicate of its shape to pieces that are turned,second, coincidence between the line of the spindle and the movement of the carriage,third, a cross feed of the tool at a true right angle to the spindle and carriage movement,fourth, durability of wearing surfaces, especially the spindle bearings and sliding ways. To these may be added many other points, such as the truth of feeding screws, rigidity of frames, and so on, but such requirements are obvious.
  • Classification and concentration for the manufacture of inorganic powder materials
  • Classification of ceramic materials
  • Removal of fine particles, including iron powder
  • Removal of fine particles from pigments
  • Removal of fine organic particles from solvents
  • Separation of starch and yeast
  • Removal of fine particles from high-temperature strong acid solutions
  • Removal of fine particles from low-temperature solutions